We cannot emphasize enough the importance of measuring your new belt correctly. Sizing your belt is critical and is your responsibility. Remember each belt is hand crafted from the information you give us.
We do not need your pant size or your waist size.
Please follow the instructions on “Sizing your belt”. (If you carry an inside the Waist Band (IWB) holster you will need to measure with your holster in place).
If you have any questions concerning Sizing, please give us a call because mismeasured belts are not returnable.
How to size your belt when ordering using a belt you already have:
Measure a belt you have now from the end of the buckle to the hole you use most often (to the nearest inch). This measurement should be about two inches larger than your waist or pant size. If you are measuring an old belt that has already “contoured” (has that curve in the back) to your body – I would recommend you use the “cloth tape measure” method to obtain the correct measurement. That curve is difficult to get out, thus you’re almost guessing at the correct size.
How to size your belt when ordering using a cloth measuring tape
Note: If your measurements end up to be in between inch marks you should round it off to the next larger inch mark.